TPM 200-8½ inch / A4 Thermal Printer Mechanism/Controller Specifications
(Click to view: Specifications, Spec Sheet, Order Information, TPM 200-8 ½inch)

Technology	Direct Thermal
Print Speed	Up to 2.0 ips (50 mm/sec)
Resolution	203 dpi (8 dots/mm) or 300 dpi (12 dots/mm)
Total No. Dots	1728 (203 dpi) or 2592 (300 dpi)
Printhead Life Abrasion (based on 12.5% print density):	50 km of paper (203 dpi) 100 km of paper (300 dpi)
Electrical:	50 million dot pulses (203 dpi) 100 million dot pulses (300 dpi)
Graphic Driver*	Windows® 95/98/NT/2000
Graphic Emulation*	Epson ESC/P
Bar Codes* (generated internally):	Code 2 of 5 (matrix, industrial, interleaved, Datalogic) Code 39, Code 128, EAN 8, EAN 13, Codabar
(generated externally):	Any, generated by Windows® standard GDI file by host
Paper Width	8.66 inches max. (220 mm max.)(user adjustable)
Printable Area	8.50 inches (216 mm)
Paper Weight	80 - 120 g/m2
Paper Capacity	12 inch (300) mm roll diameter (when used with properly designed roll holder)
Interface Types*	Bi-directional Centronics parallel interface RS-232 (19,200 baud max.) IEEE 1284-II Nibble Mode Interface
Print Buffer Size* (shared with downloaded fonts)	512 KB standard, expandable to 3.5 MB (203 dpi) 3 MB standard (300 dpi)
Operating Voltage*	24 VDC ±10%
Power Consumption*	approx. 12 VA typical (standby) approx.  96 VA typical (printing) approx.  480 VA typical (peak)
Cutter Type	Full Cut / Self-sharpening
Cutter Life	1,000,000 cuts with 80 g/m2 paper
Dimensions (WxDxH) (w/o presenter)	11.30 x 4.02 x 4.10 inches (287 x 102 x 104 mm)
Temperature Range Operating:	+5ºC to +45ºC
Storage:	-30ºC to +70ºC
Humidity Range Operating:	20% to 80% RH, non-condensing
Storage:	10% to 90% RH, non-condensing
Options	Printer control board Loop presenter Black mark sensor Paper low sensor Memory extensions: 1MB, 1.5MB, 3MB

Specifications shown with an asterisk ("*") assume the use of the HECON TPM 200 standard printer control board.
All specifications subject to change without prior notice.